609176001415100 [KYOCERA AVX]
Connector Accessory;型号: | 609176001415100 |
厂家: | KYOCERA AVX |
描述: | Connector Accessory 连接器 连接器支架 |
文件: | 总5页 (文件大小:137K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Discrete Wire IDC Contact & Cap
Series 9176-400
The 917X series of surface mount Insulation Displacement Connectors (IDC) were
developed to meet the harsh automotive and industrial market applications for
connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This
industry proven contact system has been tested to automotive levels of shock,
vibration, and temperature cycling to prove their reliability and robustness. This new
single contact was developed as a standalone component to enhance the
application uses with the IDC technology. The simplicity of inserting a wire into an
SMT contact with a small tool or optional retention / termination cap allows a wide
range of devices to be connected to the PCB without soldering. In SSL applications
specifically, these contacts are used to bring power and signal onto the PCB or are
used to daisy chain multiple boards together in a long string. While the IDC contact
provides a gas-tight connection to conductor of the wire, the optional cap provides
a positive strain relief even in the harshest conditions. In case of repair, the wires can
be removed and replace up to three times.
The single 9176-400 series contact and cap accepts 22 AWG to 24 AWG wires
with an insulation diameter ranging from 1.0mm to 1.5mm. These dual beam
contacts support a 6 amp current rating with a large SMT solder base to provide
maximum stability on the PCB. The optional locking strain relief cap acts as the
termination tool for severe vibration applications.
APPLICATIONS
FEATURES AND BENEFITS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• IDC contact is supplied in T&R pockets for standard SMT placement
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Optional termination cap provides additional strain relief for severe environments
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Reduced total applied cost versus solder or crimp processes
• Application notes: refer to 201-01-124
• Individual contacts can be located anywhere on the PCB based on specific application
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 6 Amps/Contact
• Voltage Rating: Dependant on
component proximity
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
HOW TO ORDER – CONTACT OPTIONS
001
4XX
006
70
9176
Number of Ways
No of
Wire Gauge Size
Plating
Option
06 = Pure Tin
all over
Prefix
70 = Contact
Series
Code
Accepted
Wire Gauge
Code
Details
Ways
001
1
Page 20
422
432
22 Gauge Stranded
24 Gauge Stranded
443 26-28 Gauge Stranded
HOW TO ORDER – CAP OPTIONS
001
4XX
X00
60
9176
Number of Ways
No of
Wire Gauge Size
Insulator Color
Prefix
60 = Cap
Series
Code Color Application
Code
Wire
Insulation
Ø 1.0-1.5
Code
Details
Ways
000 Black
100 White
Industrial
Lighting
001
1
Page 20
415
18
Discrete Wire IDC Contact & Cap
Series 9176-400
CONTACT DETAILS
Code
Accepted
Wire Gauge
A
422
432
22 Gauge Stranded
24 Gauge Stranded
0.47
0.37
443 26-28 Gauge Stranded 0.20
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
3. CONTACT PLATING: PURE TIN.
4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 22 AND 28 GAUGE STRANDED WIRE. SEE TABLE.
5. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-126 AND APPLICATION NOTES 201-01-124.
7. SMT PCB LAYOUT, REFER TO PAGE 20.
8. PACKING IN TAPE AND REEL, QUANTITY 2000 PER REEL.
9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-4XX-X06S.
10. ASSEMBLY TOOLING ON PAGE 21 FOR WIRE INTO CONTACT.
PACKING DETAILS
REEL QTY
LEADER
TRAILER
2 000
480MM
120MM
19
Discrete Wire IDC Contact & Cap
Series 9176-400
22-24 AWG IDC WIRE TO BOARD CONNECTOR
SINGLE CONTACT
SMT PCB LAYOUT
PURE TIN PADS
ORIENTATION OF CONTACT ON PAD
ASSEMBLED/INSTALLED PRODUCTS
NOTES:
1. CONNECTOR CAN BE USED WITH CONTACT ONLY OR WITH OPTIONAL CAP.
2. OUTLINE OF CAP WHEN USED.
3. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION NOTES 201-01-124.
4. DIMENSIONS SHOWN ARE REFERENCED DIMENSIONS.
5. ASSEMBLY TOOLING FOR WIRE INTO CONTACT SEE PAGE 21.
20
Discrete Wire IDC Contact & Cap
Series 9176-400
ASSEMBLY TOOLING – CAP NOT USED
WIRE INTO CONTACT
NOTES:
1. ASSEMBLY TOOLING FOR CAP.
2. MINIMUM AREA OF PCB TO BE KEPT
CLEAR OF COMPONENTS, TACKS
PERMISSIBLE.
3. WIRE AND CAP INSERTED IN ONE
OPERATION.
4. REFER TO APPLICATION NOTE 201-01-124
FOR FURTHER INFORMATION.
PLASTIC TOOL – LOW/MEDIUM VOLUME
METAL TOOL – HIGH VOLUME
06-9176-7023-01-000
06-9176-7024-01-000
UNIVERSAL HANDLE
06 7000 7730 01 000
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9176-400 IDC
HAND INSERTION TOOLING*
ACCESSORY CAPS
Wire
Plastic
(medium volume)
Metal
(high volume)
Cap Application
Tool
AWG
Positions
Part Number
White
Black
Insulation
Ø 1.0 - 1.5
Ø 1.0 - 1.5
Ø 0.7 - 1.0
Ø 0.7 - 1.0
22
24
26
28
1p
1p
1p
1p
709176001422006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000
709176001432006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000
709176001443006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000
709176001443006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000
* Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
21
Discrete Wire IDC Contact & Cap
Series 9176-400
CAP DETAILS
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION.
2. CAP MATERIAL: GLASS FILLED NYLON 46, COLOR SEE PAGE 18.
3. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.0MM TO 1.5MM.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106, APPLICATION NOTES 201-01-124.
6. PACKING IN BAGS, QUANTITY 2000 PER BAG.
7. FOR INSTALATION DETAILS REFER TO DRAWING 70-9176-001-4XX-006S.
22
相关型号:
©2020 ICPDF网 联系我们和版权申明